Filter
Top Products
Configuring the Monitor Using a PC
Chapter 4 Configuring the Monitor 41
Writing/Resetting the Serial Number and Setting the Options
Note— You can write the serial number to the monitor only if you have replaced the
CPU Board with an exchange board. If you have accidentally entered the
wrong serial number, you can reset it using an access code available from
your Philips Medical Response Center or from the Philips Technical
Marketing information "Softserver" page on the Philips Intranet.
The serial number can only be written once to the exchanged board with
each access code.
To write the serial number:
1. Using the keyboard, type in the serial number of the monitor. (This is printed on the
side of the monitor.)
2. Press
Enter.
A confirmation message asks if the serial number is correct:
If it is correct, press the Y key.
If it is not correct, press the N key and retype the serial number.
You then go to the
Set Options screen.
Series 50 Fetal Monitor Configuration and Service Software Rev A.nn.nn
Service Menu
MESSAGE:
Type in 10 alphanumerics from Serial Number - Label and press >ENTER<