Filter
Top Products
Chapter 3 Installing the Monitor 21
3
Installing the Monitor
Fitting the Monitor to a Surface
The monitor can be mounted on (but not fixed to) an existing surface.
Fitting the Monitor to the Angle Mount
To fit the monitor to the angle mount:
1. Holding the monitor at a slight angle, put the front feet into the holes (A).
2. Lower the monitor till the back feet “click” into the holes (B). Make sure that all four
feet are located firmly in place.
Figure 3-1 Fitting the Monitor to the Angle Mount
To remove the monitor from the angle mount hold the monitor in both hands, press both
lock-release buttons (C) simultaneously and remove the monitor from the angle mount.
The lock mechanism may break if it is not fully released!