Filter
Top Products
Carts
24 Chapter 3 Installing the Monitor
Carts
You can mount the Series 50 A and the Series 50 IP-2 fetal monitors on the CL, CM or CX
carts. Cleaning instructions for the carts and safety details are provided in the Carts
Equipment Note delivered with your cart.
Fitting the Barcode Reader Holder
To fit the Barcode Reader holder (HBCS-2998) to the monitor or cart:
1. Using ethanol, clean the surface of the monitor or cart thoroughly.
2. Peel off the backing from the adhesive strip and press the holder firmly into place.
Before using the holder, allow 24 hours for the adhesive to set.
Table 3-1 Carts: Specifications
Specifications
Carts
CL (M1323A) CM (M1324A) CX (M1325A)
Width (mm) 514 614 614
Depth (mm) 625 625 625
Height (mm) 805 989 1117
Weight (kg) 24.2 50.6 63.4
Table 3-2 Carts Replacement Parts
Replacement
Parts
Part numbers
Cart CL
(M1323A)
Cart CM
(M1324A)
Cart CX
(M1325A)
Wheels M1324-42100 ✘✔✔
M1323-42075 ✔✘✘
Drawers M1324-68500 ✘✔✔
M1323-68450 ✔✘✘
CAM Mounting
Arm Kit
5061-8340 ✔✔✔
Mounting Kit IUP
Pole
80310-68701 ✔✔✔
Infusion Pole
Mount
5061-8364 ✔✔✔
Mounting Rail Kit 5061-8365 ✔✔✔