Filter
Top Products
Chapter 10 Peripherals 107
10
Peripherals
Fitting the Combined Interface Module
To fit the Combined Interface Module:
1. Remove the screw which holds the interface socket cover in place on the base of the
monitor and then remove the interface socket cover.
2. Connect the Combined Interface Module.
3. Screw the module in place.
Figure 10-1Fitting the Combined Interface Module
With the module fitted, you can connect the following peripherals to the monitor:
One of the following to the RS232 serial interface:
HBCR8200 Barcode Reader.
Dinamap 1846/8100 maternal NIBP Monitor.
COLIN Press-Mate/Nippon Colin Model BP-8800 maternal NIBP Monitor.
Nellcor OxiFirst Fetal Oxygen Saturation monitor.
M1310A Fetal Telemetry to the telemetry socket.
M1383A/B/C OB TraceVue to the system interface.