Filter
Top Products
Top Cover
138 Chapter 11 Replacing Parts
Top Cover
To remove the top cover:
Figure 11-11Removing the Top Cover
1. Switch off the Monitor and disconnect the power cable; then remove the board.
2. Remove the five screws (S).
3. Open the paper table.
4. Lift off the top cover.
Caution
If you need to remove the cable (M), the battery supply is also disconnected
from the CPU Board. Data stored in the battery-buffered RAM will be lost.
5. Disconnect the cable (M) if necessary.
To refit the cover, reverse the above procedure.