Filter
Top Products
Configuring the Monitor Using a PC
Chapter 4 Configuring the Monitor 37
Reading the Error Log
This displays the error log. (See -44 for the list of error log messages.)
Up to 16 error messages can be displayed on a screen. To see the next or previous screen, use
the or keys on the keypad, or the
E or X keys. At the end of the Error Log, No
more Data available
is displayed.
Press
SHIFT and PrtSc to print a page on LPT1.
Press
Enter to return to the Service Menu.
To write the error log data to a file, press the
W key. The data is then stored as
ERRLOG.DAT in the directory containing PEGSERV.EXE. The data is stored as ASCII
characters, and therefore the file can be printed using the DOS Command
print
ERRLOG.DAT
. The file is overwritten each time you press the W key.
> PAGE 1 < Errorlog of : 2948G00010
Use >W< to Write ErrorLog Data to File >ErrLog.DAT<
use CursorKey >Down< or >X< to see next Page, <ENTER> to leave
Err. Count 1st Date+Time last Date+Time
Code nnnn yy/mm/dd HH:MM yy/mm/dd HH:MM
|-| |--| |------.----| |------.----|