Filter
Top Products
Configuring the Monitor Using a PC
34 Chapter 4 Configuring the Monitor
Adjusting the
Recorder
The Recorder Heat-Adjust is to compensate for different tolerances in the paper.
To change a setting:
1. Using the appropriate keys, move the cursor to the selection you require.
2. Press
Enter.
To return to the Main Menu:
1. Move the cursor to
Return to Main Menu.
2. Press
Enter.
Example
On the screen above, the actual value of the Recorder Zero-Adjust is closer to the
left side. If this is not printed exactly on
20 on the Toco channel, then you must realign the
Selected Value is: to the right or to the left and then press Enter. The program
will adjust the recorder accordingly.
Note— The actual values on your monitor may be different from those shown.
Series 50 Fetal Monitor Configuration and Service Software Rev A.nn.nn
Recorder Adjustments:
Recorder Heat Adjust: Actual Value is: |
Selected Value is |
∨
|……………|
Min Max
Recorder Zero Adjust: Actual Value is: |
Selected Value is |
∨
|……………|
Left Right
Return to Main Menu
MESSAGE:
Select with >cursor keys< or >E, S, D, X< then press <ENTER> to execute!!