Filter
Top Products
Monitor Control and Display Panel
Chapter 1 General Information 7
Monitor Control and Display Panel
Figure 1-2 Layout of the Monitor Control and Display Panel
M1351A Single
Ultrasound
Model
1. Monitor On/Off Light.
2. Telemetry Indicator. On when the Fetal Telemetry Receiver is connected and
switched on.
3. Function Key. Used to switch FMP and Fetal Alerting on and off.
4. US Display. Shows the FHR detected by the US transducer.
5. US Signal Quality Indicator. Indicates the quality of the signal detected by the US
transducer:
Green (optimum).
Yellow (fair to potentially poor).
Red (unacceptable).
6. US Speaker Light. On when you are hearing the US heartbeat.
7. US Volume Keys. Sets the volume and selects the US heartbeat.
8. Toco Display. Shows uterine activity.
9. Toco Baseline Key. Zeroes the Toco display and trace to 20 units.
M1351A Dual
Ultrasound
Twins Model
1. Monitor On/Off Light.
2. Telemetry Indicator. On when the Fetal Telemetry Receiver is connected and
switched on.
3. Function Key. Used to switch Twins Offset, FMP, and Fetal Alerting on and off.
4. US1 Display. Shows the FHR detected by the US1 transducer.