Filter
Top Products
Upgrade Procedure
176 Appendix C Upgrade Key
6. Stick the feature label to the front of the monitor, as in the example below:
A: Fetal Movement Profile
B: Dual Ultrasound
7. Switch the monitor off and then on: it will perform the power-on self-test. If an error
message is displayed, contact Philips. If “
-8-” is displayed, the upgrade was not
successful. Try the upgrade again from the beginning.
If “
--- --- ---” is displayed, the new software is installed and checked. Please
refer to the Instructions for Use for information on necessary performance assurance.
Repeat steps 1 to 7 for each monitor to be upgraded.
When the upgrade key has performed as many upgrades as it was programmed to perform,
return it to Philips for recycling. Please contact your nearest Philips Service Center for
details.