Filter
Top Products
Configuring the Monitor Using Pushbuttons
26 Chapter 4 Configuring the Monitor
Configuring the Monitor Using Pushbuttons
You can use the pushbuttons to set such settings as, time format, date format, IUP scale,
paper format, recorder scale offset, recorder heat, and language options.
To change a setting:
1. Disconnect all transducers from the monitor and disconnect or switch off Telemetry.
2. While pressing , press
Test.
The display shows C01 in the US1/US display and 0 or 1 in the Toco display.
3. Scroll through the menu by pressing the or key until you arrive at the
menu item you want to change. The menu items and their settings are shown in Table
4-2.
4. Press the key to change the setting (
0 or 1).
5. Press
Test to store the new settings, or wait about 15 seconds without making any
keystrokes.