Filter
Top Products
Safety Testing
Chapter 9 Preventive Maintenance, Care and Cleaning 101
documentation included with those products.
When performing safety tests, you must use a standard safety tester. You can use testers
complying with IEC 60601-1 internationally. You may also use testers complying with any
local standards and statutes applicable to the country of the installation. For safety test
procedures see the operation instructions of the safety tester used.
If using the Metron safety tester use your local regulations to perform the test, for example
• in Europe: IEC60601-1/IEC60601-1-1
• in the US: UL2601-1
The Metron Report should print results as detailed in this chapter, along with other data.
Note— For information and ordering guides for Metron products contact:
Metron AS, Travbaneveien 1, N-7044 Trondheim, Norway
Tel (+47) 73 82 85 00; Fax (+47) 73 91 70 09;
E-mail: sales@metron.no/support@metron.no
www: http://www.metron-biomed.com