Filter
Top Products
Honeywell
MK XXII EGPWS Installation Manual
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C
SHEET
26
Vendor Name Vendor P/N Description QTY UM Honeywell P/N
Emteq D 07002-100 ARINC 453 Cable A/R EA
M17/176-00002 Military Specification A/R EA
1.9.2 GPS Antenna & cable
The GPS Antenna & cable can be ordered from their manufacturers using the following part
numbers:
Vendor Name Vendor P/N Description QTY UM Honeywell P/N
Bendix/King 071-01545-0200 KA 91 GPS Antenna 1 EA
Bendix/King 071-01553-0200 KA 92 GPS Antenna 1 EA 300-1147-001
Comant CI 405-2 KA 92 GPS Antenna 1 EA 300-1147-001
Bendix/King 050-03318-0000 Antenna Installation Kit OPT EA 405-0432-001
Sensor Systems
S67-1575-38 S67 GPS Antenna 1 EA
Sensor Systems
S67-1575-52 S67 GPS Antenna 1 EA
Sensor Systems
S67-1575-133 S67 GPS Antenna 1 EA
Thermax M17/128-RG400 Coax Cable, RG400 A/R EA
Coax Cable, RG-142 A/R EA
Amp 225554-6 TNC Angle Plug, Male 1 EA 440-1239-001
Amphenol 79075 TNC Angle Plug, Male 1 EA 440-1239-001
1.9.3 Circuit Breaker
The Circuit Breaker needs to be a 3 Amp delayed action circuit breaker.
Vendor Name Vendor P/N Description QTY UM Honeywell P/N
Klixon (T.I.) 7277-2-3 3 Amp Circuit Breaker,
EGPWS power +28
1EA
Klixon (T.I.) 7277-2-1 1 Amp Circuit Breaker,
lamp power +28
1EA
1.9.4 Annunciators & Switc h/Annunciators
The devices shown below are switch/annunciators and are representative of those used in some
installations. The installer/customer is cautioned to verify regulatory approval of the annunciation
devices installed. See Appendix D for Vendors.
1.9.4.1 GPWS Warning (red) P/TES T; switch/annunciator assembly
The ‘GPWS’ annunciator provides visual indication of an EGPWS alert. The GPWS warning (red)
annunciator also has a switch that is used to manually initiate EGPWS Self Test.