Filter
Top Products
Honeywell
MK XXII EGPWS Installation Manual
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C
SHEET
234
TABLE E 3.1.8-1: RADIO ALTITUDE INPUT SELECT TYPE 1 (ALT 55)
SIGNAL CONNECTION SUMMARY DATA
Radio Altimeter #1 (+) = J1-64
(-) = J1-45
Format: Alt 55 with Validity Flag
Input Type: Basic
Fault Designation: RADIO ALTIMETER FAULT
Validity: Radio Altitude Valid Discrete #1 (+28V)
PIN FUNCTION CONNECTION PIN TYPE CHANNEL DESIGNATION
REFERENCE
Polarity/Configuration
Radio Altitude Validity
Discrete #1 (+28V)
J1-29 Input 28V_DISC_07 >+17V = Valid
<+4.4V = Invalid
DH Discrete (Gnd)
J1-33
Input GND_DISC_11 Gnd = Below DH
<not> Gnd = Above DH
CONFIGURATION DATA
Description Value
Out of Track Maximum
2800
Out of Track Minimum
Pseudo altitude is only allowed to operate within
these limits.
-20
Pseudo Altitude Type Selects parameters for pseudo altitude engage logic
4
Field Enable Type Selects pseudo altitude field elevation
2
TABLE E 3.1.8-2: RADIO ALTITUDE INPUT SELECT TYPE 2 (ARINC 429)
CHANNEL
429RX_5
CONNECT TO:
Left ( #1) LRRA
(Low Speed)
Fault Designation: RADIO ALTIMETER BUS
Bus Type: Basic
A = J2-21
B = J2-4
Data
Radio Altitude
Label
164
Sig. Bits
16
Range
±8192 FT
Signal Type
Basic
Resolution
0.125
Rate (ms)
25-50
PIN FUNCTION CONNECTION PIN TYPE CHANNEL DESIGNATION
REFERENCE
Polarity/Configuration
DH Discrete (Gnd) J1-33 Input GND_DISC_11 Gnd = Below DH
<not> Gnd = Above DH
TABLE E 3.1.8-3: RADIO ALTITUDE INPUT SELECT TYPE 3 (RT-200/300)
SIGNAL CONNECTION SUMMARY DATA
Radio Altimeter #1 (+) = J1-64
(-) = J1-45
Format: DC with Validity Flag (RT-200/300)
Input Type: Basic
Fault Designation: RADIO ALTIMETER FAULT
Validity: Radio Altitude Valid Discrete #1 (+28V)
PIN FUNCTION CONNECTION PIN TYPE CHANNEL DESIGNATION
REFERENCE
Polarity/Configuration
Radio Altitude Validity
Discrete #1 (+28V)
J1-29 Input 28V_DISC_07 >+17V = Valid
<+4.4V = Invalid
DH Discrete (Gnd) J1-33 Input GND_DISC_11 Gnd = Below DH
<not> Gnd = Above DH
CONFIGURATION DATA
Description Value
Out of Track Maximum
2800
Out of Track Minimum
Pseudo altitude is only allowed to operate within
these limits.
-20
Pseudo Altitude Type Selects parameters for pseudo altitude engage logic
3
Field Enable Type Selects pseudo altitude field elevation
2