Filter
Top Products
Honeywell
MK XXII EGPWS Installation Manual
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C
SHEET
202
E 5.3.6 CATEGORY 6, TERRAIN DISPLAY SELECT
Section Overview
The following table (5.3.6) has an identification number (ID) associated with each Terrain Display configuration. Each of the
ID rows has a group number for the Display Configuration, the Input Control. The TA&D Pop Up Disable function is
defined by a Boolean. The ID groups will completely identify a particular Terrain Display Interface.
In this category the following signals are configured by the ID number:
Signal Name Signal Type Defined By
Terrain Display Bus:
KCPB* or ARINC Display Configuration Group
Range Bus:
ARINC 429 or RS-422 Display Input Control Group
TA&D Alternate Pop Up
Boolean Defined directly in Table
*KCPB is also known as AlliedSignal Picture Bus (ASPB)
TABLE E 3.1.6: TERRAIN DISPLAY SELECT FOR EGPWS MKXXII
ID
E 3.1.6-x-
x
TAD
and
TCF Disable
Application Notes
Type
Effectivity
0 False KC Picture Bus (KCPB) (Note 1)
-006
1False
No Display
TAD And TCF Enabled
-006
2 True TA&D / TCF Disabled -006
3 False Collins ProLine II (4x4) (Note 3)
-006
4 False Bendix PPI-4A/4B (Note 2)
-006
5 False Collins ProLine II (5x6) (Note 3)
-006
6 False Collins ProLine II (5x4,5x5) (Note 3)
-006
Reserved
Reserved
9 False Non-Integrated EFIS 40/50 (Honeywell/Bendix)
-006
10 False Integrated EFIS 40/50 (Honeywell/Bendix)
-006
12 False Collins WXI-701/711, without Auto Range
-006
13 False
Integrated Honeywell P880/660/440
(WXPD w/ SCI range)
-006
14 False Bendix PPI-4A/4B without Auto Range (Note 2)
-006
15 False
Integrated Honeywell P880/660/440
(WXPD w/ SCI range and aircraft symbol on overlay)
-006
16 False Bendix, IN182A, IN812A, (RDR 2000)
-010
17 False Bendix, IN842A, IN862A, (RDR 2100)
-010
18 False
KC Picture Bus (KCPB) w/o presentation of Terrain
Awareness Corrected Altitude (Note 1, Note 7)
-010
235 False Collins ProLine 4 (Non-Intergrated)
-011
236 False Collins ProLine 4 (Intergrated)
-011
242 False KC Picture Bus (KCPB) (Note 1, Note 6)
-006
246 False Non-Integrated EFIS 10 (Bendix/Honeywell)
-006
250 False
Honeywell EDZ705 (5x5), EDZ756 (5x6) with DC-811
range push button control
-006
255 False Honeywell SPZ8000 (w/SCI range) (Note 4)
-006
Note 1: For a description of the KCPB features implemented in a particular software release, see Appendix B: KCPB Phased
Implementation in the EGPWS Interface Methodology document 060-4303-000.
Note 2: This configuration is applicable to RDR-4B with a mod that makes it capable of displaying blue.
Note 3: Refer to Rockwell Collins Service Information Letter, EFIS 84/85/86 SIL 2-99 Dated March 16/99 or later revision,