Filter
Top Products
Honeywell
MK XXII EGPWS Installation Manual
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-225 REV: C
SHEET
223
Table E 3.1.6-235 Display Configuration (Collins ProLine II, 5x6, and ProLine 4)
Function Value Reference section
Display Type Collins ProLine II (5x6)
Sweep Type Standard with +/-60 degree limit
Category 7, Options Select Group #1
TA&D Alternate Pop Up: False TA&D Alternate Pop Up: True
Auto Pop Up
Pop Up On Caution or Warning Never Pop Up
Category 7, Options Select Group #1
Peaks Enabled: False Peaks Enabled: True
Peaks Mode
(Available as of -003)
Peaks Off Peaks On
Manual select Anytime
Manual deselect Anytime
Auto Range No
Moving Marker No
Overlay Page Yes; “TERR” is located on the right side of display.
“TERR” or Peaks Elevations located on upper left side of Terrain image
as of -003.
Display bus type Standard ARINC 453
TERRAIN DISPLAY BUS #1
453TX_1
CONNECT TO:
A = J1-58
B = J1-59
Terrain Display data to switching relay/Symbol Generator
TERRAIN DISPLAY BUS #2
453TX_2
CONNECT TO:
A = J1-56
B = J1-57
Terrain Display data to switching relay/Symbol Generator
Integration Notes:
1. Peaks Elevation numbers have been re-positioned to improve their presentation/visibility as of –010 release.
Display Input Control Group
CHANNEL
429_422RX_1
CONNECT TO:
IOC #1 Bus (High Speed)
Format: ARINC429
Fault Designation: IOC BUS 1
Bus Type: Basic
A = J2-37
B = J2-36
Data
Range (Mode/Range Word)
Label
155
Sig. Bits
Discrete
Range
5-640NM
Signal Type
Basic
Resolution
N/A
Rate (ms)
50
CHANNEL
429RX_3
CONNECT TO:
IOC #2 Bus (High Speed)
Format: ARINC429
Fault Designation: IOC BUS 2
BUS TYPE: BASIC
A = J2-41
B = J2-40
Data
Range (Mode/Range Word)
Label
155
Sig. Bits
Discrete
Range
5-640NM
Signal Type
Basic
Resolution
N/A
Rate (ms)
50
* When interfacing to a single display controller configuration the bus must be connected to both EGPWS input channels.
This prevents the EGPWS from reporting an external bus fault on the second channel.
Output 429 Bus Group
Channel Pins Comments
429TX_1 (Low Speed) A = J2-43
B = J2-42
Transmits
429TX_2 A = J2-26
B = J2-9
No Connection (No Data Output)