Open as PDF
minimum (harmonies are perfectly timed with the lead voice) and 99 being the
maximum (harmonies are very loosely timed with the lead voice).
• AMOUNT (0-99)
This parameter adjusts the level of both Harmony effects simultaneously and is
accessed by turning the HARMONY LEVEL knob from the Preset screen (see
• KEY (A maj-G# min)
This parameter sets the harmony key/scale when Live Adapt is not used and is
accessed by turning the KEY/SCALE knob from the Preset screen (see below).
The below image shows the four Harmony parameters available by adjusting the
knobs from the Preset screen.
AMOUNT VOICING VOICING KEY
79 3D 5D Adapt
To dial in the Harmony effect:
1. Sing into the microphone (or use the Sound Check feature, see "Sound Check"
on page 19
2. Press the <HARMONY 1> button to enable the rst harmony voice – the
button will light when the voice is active.
3. From the Preset screen, turn the <HARMONY LEVEL> knob and ensure
the AMOUNT parameter is set high enough to hear the Harmony effect (a
setting of between 60-70 should work well).
4. By default, the Harmony Live Adapt feature is enabled. This feature automatically
adapts the Harmony key/scale to musical changes in your performance using the
internal mic, Aux In jack, or Guitar In jack. If you want to manually set the key/
scale, you will need to diable this feature, see "Live Adapt™" on page 20
for further information. From the Preset screen, you can then turn the <KEY/
SCALE> knob to select the desired key/scale for the harmony to follow.
NOTE: If Live Adapt Harmony is enabled in the Live Adapt menu you can still
set a key/scale but the Live Adapt feature will override this setting as long as
it is enabled.