Filter
Top Products
Owner's Manual
31
FS3X Footswitch Control
The footswitch functions in the Live Harmony are reassigned when the Looper
is enabled. This prevents changing presets and A/B status when controlling the
Looper functions. An optional DigiTech FS3X Footswitch can be used for full-time
Looper control, freeing up the Live Harmony footswitches to be used for full-time
preset navigation. This provides streamlined control and quick access to the Looper
functions.
FS3X Footswitch Looper Functions:
Mode Switch
Press this footswitch to
enable recording, playblack, or
overdub recording functions.
Press and hold to perform
overdub Undo/Redo
functions.
Down Switch
Press this footswitch to stop
playback or recording. Press and hold
to clear the loop and exit Looper
mode.
Up Switch
Not used.
NOTE: When using an FS3X Footswitch with the Live Harmony, the EP
(Expression Pedal) TYPE parameter in the System menu must be congured for
FS3X control (this is the default setting from the factory). See "EP (Expression
Pedal) Type" on page 39
for more information on EP TYPE parameter.