Filter
Top Products
Owner's Manual
10
Connection Diagrams
Cable Diagrams
Stereo Connection to Live Harmony Aux In
Use a cable like the one shown below when connecting a stereo 1/4" feed to the
Live Harmony's Aux In jack.
1/8" Stereo TRS to Dual 1/4" TS Cable
Left
Channel (+)
Right
Channel (+)
Ground
Left
Channel
Right
Channel
Ground
Ground
Left +
Left +
Right +
Right +
Ground
NOTE: You can also use the above cable when connecting a mono signal to the
Aux In jack – such as when connecting an aux send or direct output from the
mixing console. Simply connect only one of the 1/4" TS plugs to the desired
output then leave the other disconnected.
Stereo Connection from Live Harmony Line Out
Use a cable like the one shown below to connect the Live Harmony's 1/4"
Headphone/Line Output to the 1/4" line inputs of another device.
1/4" Stereo TRS to Dual 1/4" TS Cable
Left
Channel (+)
Right
Channel (+)
Ground
Ground
Left +
Right +
Left
Channel
Right
Channel
Ground
Left +
Right +
Ground
NOTE: Connecting a mono TS cable to the 1/4" stereo Headphone/Line Output
jack is not recommended. If you require a single mono feed from the 1/4" stereo
Headphone/Line Output, it is recommended that you use a stereo cable as shown
above and use only one of the TS plugs, leaving the other disconnected. You will
then need to turn STEREO mode off in the System menu. See "Stereo" on page
35
for more information on changing the STEREO parameter.