Filter
Top Products
Owner's Manual
33
System Setup
The System menu is used to congure the Live Harmony for your application and
is accessed by pressing the <System> button. Pressing the <DATA> encoder
navigates the various pages within the System menu and turning the corresponding
<EDIT> knobs will edit the on-screen system parameters. This section of the
manual describes the available options in this menu and how to access and edit
them. Most of these parameters are global and do not require that you store them
to a preset. However, there are a couple of exceptions.
Out Pad
This system parameter adjusts the amount of output attenuation. By default, the
Out Pad is turned off and this will be the correct setting for most applications.
When enabled, the Out Pad can attenuate the output signal by up to 15dB in 1dB
increments. Use the Out Pad when connecting headphones to the Live Harmony or
whenever the outputs need to be attenuated to prevent input clipping of any device
the Live Harmony is connected to. Changing this parameter will affect the 1/4" and
XLR outputs.
To edit the OUT PAD setting:
1. Press the <System> button.
2. Turn the <Edit 1> knob to select the desired setting.
3. Press the ashing <System> button to exit the System menu.