Open as PDF
Band-Electric Guitar Application
This setup is ideal for the electric guitarist who wants the benet of musIQ chord
recognition but plays through an amp and doesn't want the guitar mixed with the
vocals at the XLR outputs. To prevent the guitar signal from being fed directly to the
PA, adjust the GTR XLR LVL to 0 on page 2/6 in the System menu, see "GTR XLR
LVL" on page 36
for further information.
Mic or Line
DigiTech FS3X Footswitch or
Omit For Mono
NOTE: By default the Live Harmony is congured for stereo operation. To
congure the Live Harmony for mono operation you must turn off the STEREO
option in the System menu, see "Stereo" on page 35 for further information.