Filter
Top Products
Owner's Manual
28
Preset A/B Parts
Each preset has two parts, referred to as “A” and “B”. Vocal effects can be
independently enabled or disabled in each part. This feature can be helpful for
applying different effects within a song without having to change presets, such as
enabling delays, distortion, or harmony effects on certain words or vocal phrases.
These parts are toggled using the A/B footswitch. The A/B footswitch can be
congured for Toggle, Momentary, or Auto operation. For information on conguring
the A/B footswitch, see "A/B Footswitch Conguration" on page 34.
To store A/B parts:
1. Select the desired preset using the <Up> and <Down> footswitches or the
<DATA> encoder.
2. Ensure part A is selected (indicated by the "A" LED above the A/B footswitch). If
it is not, press the <A/B> footswitch to select it.
3. Enable the Vocal effects you wish to use for part A by pressing their
corresponding buttons (e.g., <FX>, <Reverb>, etc.).
4. Press the <A/B> footswitch to switch to part B (indicated by the "B" LED
above the A/B footswitch). Enable the Vocal effects you wish to use for part B by
pressing their corresponding buttons (e.g., <Harmony 1>, <Delay>, etc.).
5. Now that both parts have been congured, store the preset by pressing the
<Store> button and following the store procedure. See "Presets" on page
26
for further information on storing presets.