DigiTech Live Harmony Musical Toy Instrument User Manual

Owner's Manual
Solo-Acoustic Guitar Application
Often with an acoustic guitar it is convenient to provide a single output to the PA.
The Vocalist Live Harmony allows you to mix the guitar with the vocals and send
the guitar/vocal mix to the PA via the XLR Outputs. This allows you total control
of your sound from on-stage. The Vocalist Live Harmony also provides the ability to
add chorus and reverb to your guitar signal to ll out the sound. For a solo act it is
no longer necessary to carry a mixer to the gig. To balance the guitar level with the
vocals, adjust the GTR XLR LVL on page 2/6 in the System menu, see "GTR XLR
LVL" on page 36
for further information.
Microphone Guitar
Mic or Line
Mic or Line
DigiTech FS3X Footswitch or
Volume/Expression Pedal
Power Supply
Omit For Mono
NOTE: By default the Live Harmony is congured for stereo operation. To
congure the Live Harmony for mono operation you must turn off the STEREO
option in the System menu, see "Stereo" on page 35 for further information.