Filter
Top Products
5 - 41 5 - 41
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
6) Selected Station Communication Status Monitor
Displays the communication status of the own station.
The following explains the display that is given if an error occurs with the CC-
Link IE Field Network module or in the connection cable. In this case, a button
is displayed in "Selected Station Communication Status Monitor" as shown
below. The detailed information, error factor, and troubleshooting can be
displayed by clicking the button. In addition, the icon (
) is displayed as
shown below when a destination station is being disconnected.
The Error details screen can be displayed
by clicking the button.
POINT
When the station number of the selected station is unspecified, the
Station No. Setting
button is displayed in "Selected Station Communication
Status Monitor". To specify the station number, click this button and display the Set
Station No. screen.
The following indicates the conditions for station number setting.
• The safety CPU operation mode is set to TEST MODE.
• The access level is other than Users.
• The connected station is master station.
• The selected station is a head module whose station number has not been
set.