Filter
Top Products
5 - 5 5 - 5
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
(1) Adding a new user
[Purpose]
Adds the user who can log in to the project under editing.
[Operating Procedure]
Select [Project]
[Security operation] [User management] Add button.
[Dialog Box]
5)
6)
1)
2)
3)
4)
7)
[Description]
1) User name
Input a user name within 20 characters with the alphabets, numbers, and
symbols corresponding to ASCII code (
Appendix 3) 20H to 7EH.
(For alphabets, an upper-case character is differentiated from a lower-case
character.)
2) Access level
Select an access level for the new user from the combo box.
3) New password
Input a CPU access password within 6 to 14 characters with the alphabets,
numbers, and symbols corresponding to ASCII code (
Appendix 3) 20H to
7E
H.
(For alphabets, an upper-case character is differentiated from a lower-case
character.)
When the access level is set to "Users", the password input can be skipped.
4) Confirm new password
Input the same password with 3) for confirmation.
5) Access level explanation field
Displays the explanation for the access level selected in 2).
6) OK
button
Closes the screen when the setting is correct.
The new user is registered with the User management screen.
7) Cancel
button
Cancels the setting, and closes the screen.