Filter
Top Products
5 - 27 5 - 27
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
POINT
• When a label program is not compiled, the safety devices are not highlighted.
• The program can be printed for highlighting (
Appendix 1).
• When using the instruction which processes word devices with multiple points,
the safety device is not highlighted if the safety device(s) is/are included but the
device specified as the argument to the instruction is not a safety device.
(Example) Transferring the D0 to D9 data with the block 16-bit data transfer
instruction (BMOV)
(When D0 is a safety device and D1 to D9 are normal devices)
Highlighted
(When D0 is a normal device and D1 to D9 are safety devices)
Not highlighted
(2) Changing the highlight color
The highlight color for a safety device can be changed in the Change display
color screen, displayed by selecting [Tool]
[Change display color].
1)
2)
1) Safety device
button
Sets the display color for a safety device. The default color is yellow.
2) Safety/normal mixed device
button
Sets the display color for the device where (a) safety device(s) and (a) normal
device(s) are mixed together. The default color is green.