Filter
Top Products
5 - 11 5 - 11
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
5.1.4 Locking operations
The GX Developer operations by other than the login users are inhibited.
An operation lock has two types, automatic operation lock and manual operation
lock.
This section explains how to use the operation lock function.
(1) Setting wait time for the automatic operation lock
Admin. Develop. Users
SAFETY
TEST
[Purpose]
Sets the wait time to inhibit the GX Developer operations.
When the GX Developer has not been operated over the set time, the Operation
lock screen appears, and the GX Developer operation is locked.
[Operating Procedure]
Select [Project]
[Security operation] [Wait time settings].
[Dialog Box]
3)
2)
1)
[Description]
1) Wait time (min)
Select the wait time for automatic operation lock from the combo box.
The time can be set between 10 and 120 minutes (10-minute intervals).
2) OK
button
Registers the set wait time, and closes the screen.
3) Cancel
button
Cancels the set wait time, and closes the screen.