Filter
Top Products
2 - 2 2 - 2
2 SYSTEM CONFIGURATION
MELSOFT
(3) Connecting via CC-Link IE Field Network
*1
CC-Link IE Field NetworkBoard
*2
Such as USB cable
Via CC-Link IE Field Network
QCPU
LCPU
Safety CPU
GX Developer
CC-Link IE
Field Network
Safety CPU
*1: For details of connecting a personal computer to each CPU, refer to (1) and (2) in this section, and the following
manual.
GX Developer Version 8 Operating Manual
*2: For details, refer to the following manual.
CC-Link IE Field Network Interface Board User’s Manual
(a) Compatible GX Developer
Use the GX Developer Version 8.98C or later.
(b) Compatible safety CPU
Use safety CPU whose first 5 digits of the serial number are "13042" or
later.
POINT
A CPU cannot be connected via a head module or an Ethernet adapter module.
2.2 Connecting to Another CPU via Safety CPU
The following explains the system configuration when GX Developer is connected to
another CPU via a safety CPU.
Safety CPU
USB cable
Ethernet
CC-Link IE Controller Network
CC-Link IE Field Network
MELSECNET/H
QCPU
LCPU
GX Developer
(a) Compatible GX Developer
Use the GX Developer Version 8.98C or later.
(b) Compatible safety CPU
Use safety CPU whose first 5 digits of the serial number are "13042" or
later.
POINT
An ACPU or QnACPU cannot be accessed via a safety CPU.
2