Filter
Top Products
5 - 32 5 - 32
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
(4) Network parameter items of CC-Link IE Field Network
Supplementary settings
CC-Link IE Field
Network type
Starting I/O No.
Network No.
Total stations
Station No.
Mode
Network Configuration Setting
Specify the CC-Link IE Field (Master station [Safety]), CC-Link IE
Field (Local station [Safety]) or CC-Link IE Field (Local station).
Set the first I/O No.
Set the network No.
Set the total number of (slave) stations.
Set the station number.
Set the mode.
Set the station number, station type, RX/RY setting, RWw/RWr setting.
Set the link scan mode, loopback function, and block data
assurance per station.
Set the same points according to the preset total number of stations.
Identical point assignment
Network Operation Setting
Refresh parameters
Safety communication setting
Communication Target station No.
Open Method
Transmission Interval Monitoring Time
Safety Refresh Monitoring Time
Safety data transfer device setting
Set such as parameter name, data link faulty station.
Set the refresh parameters.
Set to execute the safety communications.
Set a destination station number.
Set the open method (Active/Passive).
Set sending interval monitor time (ms).
Set safety refresh monitoring time (ms).
Set a device which stores send/receive data.
Equal assignment
Set when assigning the link device points of the specified stations equally.