Filter
Top Products
6 - 4 6 - 4
6 SAFETY FUNCTION BLOCK
MELSOFT
POINT
y If the safety function block having the same name exists on the open project,
it is overwritten.
y To open the safety function library, perform the following procedure.
1) Select [Project]
[Copy].
Enter the following in the screen below.
<Drive/Path name>
Version 1 : "(Installed location)\GPPW\FB-Library\Safety"
Version 2 : "(Installed location)\GPPW\FB-Library\SafetyV2"
<Project name>
"_all"
2) The following screen appears. Input "SafetyFB" in "User name".
No password is required.
3) The safety function library opens.
y The first character of safety function block name depends on the function block
version.
First character of Version 1: S
First character of Version 2: F