Filter
Top Products
5 - 39 5 - 39
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
(2) Diagnostic screen
Admin. Develop. Users
SAFETY
TEST
: Cannot set the station number for number unspecified station
[Purpose]
Check the status of disconnected cable and disconnected station on the network
configuration diagram that displays the current status of CC-Link IE Field Network.
Open screens such as "Operation Test" for troubleshooting and the "Information
Confirmation/Set" with buttons.
[Operating Procedure]
Select [Diagnostics]
[CC IE Field Diagnostics].
[Dialog Box]
2)
1)
3)
4)
5)
6)
8)
9)
10)
11)
12)
7)
13)
14)
[Description]
1) Select Diagnostics Destination
Displays the module and network number of the diagnostics target, and station
number of the station selected in the network information.
2) Monitor Status
Displays the current monitor status.
Clicking the Start monitor
button communicates with the module to be
diagnosed and updates the display.
Clicking the Stop monitor
button stops the monitoring.