Filter
Top Products
5 - 38 5 - 38
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
5.6.2 Diagnosing CC-Link IE Field Network
CC-Link IE Field Network diagnostics performs the network status check and the
troubleshooting when starting CC-Link IE Field Network, and performing
maintenance/operation.
CC-Link IE Field Network diagnostics executes when transfer target is own station
QSCPU, and network module mode is online or loop test.
POINT
When transfer setup is other station, CC-Link IE Field Network diagnostics cannot
perform.
(1) Diagnostic target
The following shows the stations to be a target of CC-Link IE Field Network
diagnostics.
: Diagnosed : Not diagnosed
Station
type
Module, Board Model name
Connected
station
Selected
station
1
CC-Link IE Field Network
master/local module
(with safety functions)
QS0J71GF11-T2
CC-Link IE Field Network
master/local module
QJ71GF11-T2
Master
station/
Local
station
CC-Link IE Field Network
board
Q81BD-J71GF11-T2
Head module LJ72GF15-T2
Intelligent
Device
Station
Ethernet adapter module NZ2GF-ETB
1: Station selected on the network configuration diagram of the CC IE Field Diagnostics screen ( (2) in this
section)
POINT
For details of CC-Link IE Field Network, refer to the User's Manual of each module.