Filter
Top Products
5 - 9 5 - 9
5 ADDED FUNCTIONS TO CORRESPOND TO A SAFETY
PROGRAMMABLE CONTROLLER
MELSOFT
5.1.3 Logging in to a project
(1) Functions require login certification
The following functions require login certification to the project for a safety
programmable controller.
Function
Project
Open project
Save as (When selecting the existing safety project as the "Project name")
Delete project
Verify (When selecting a safety project as a verify source)
Copy (When selecting a safety project as a copy source)
When selecting: Security operation
User management User copy button
(
Section 5.1.2)
Tool
Marge data
(2) Login operation
When performing the functions require login certification, the following setting
screen appears.
Then, perform login operation with the user name and password.
[Dialog Box]
1)
2)
5)
4)
3)
[Description]
1) Title bar
Displays the project to be logged in.
2) User name
Input the user name registered with the project to be logged in.
(For alphabets, an upper-case character is differentiated from a lower-case
character.)
3) Password
Input the login password for the user of 2).
4) OK
button
Perform login certification with the input user name and password. If the user is
allowed to operate the function, the function is performed.
5) Cancel
button
Closes the screen without login certification.