Filter
Top Products
Appendix - 4 Appendix - 4
A
PPENDICES
MELSOFT
(3) Differences in the Online menu
(a) Transfer setup
The connection via CC-Link IE Field Network can be set.
Connectable CPU to software package and the combination of networks
are as shown below.
Connection destination CPU and its network
QSCPU
Other than
QSCPU
QSCPU
Other than
QSCPU
Software
package
PC side I/F
CC-Link IE Field Network Other than CC-Link IE Field Network
QSCPU
GX
Developer
Other than
QSCPU
QSCPU (GX Works2 is not supported by QSCPU.)
GX Works2
Other than
QSCPU
:Connectable :Not connectable
(b) Monitor
The following monitors display the "CPU A" or "CPU B" information in a
safety CPU selected in the Monitor destination select option screen.
• Ladder monitor
• Device batch monitor
• Entry data monitor
To confirm the CPU information that is not displayed, switch the CPU to be
monitored in the Monitor destination select option screen in advance.
(
Section 5.2.5)
(c) Device test
When using a safety CPU, the project cannot be written to the buffer
memory.
Cannot specify the intelligent function
module device (Unn\Gmm)
Cannot select "Buffer memory".