Filter
Top Products
1 - 10 1 - 10
1 GENERAL DESCRIPTION
MELSOFT
(Continued from the previous page.)
Tools (Common function)
Only for
monitoring
1
QSCPU
2
Reference
3
Confirm project memory size
Calculates the file size to be written to a
programmable controller CPU.
---
Marge data Merges data.
Appendix 1
Check parameter Checks parameters.
---
Transfer ROM ---
--- ---
Read Reads data from ROM.
---
Write Writes data to ROM.
---
Compare Compares the data in a PC with the ROM data.
---
Write to file Writes ROM data to a file.
---
Delete unused comments
Deletes the unused device comments in a
program.
---
Clear all parameters Deletes parameters.
---
IC memory card --- --- ---
Read IC memory card Reads data from an IC memory card.
---
Write IC memory card Writes data to an IC memory card.
---
Read image data… Reads image data.
---
Write image data… Writes image data.
---
Start ladder logic test Starts/stops the ladder logic test.
---
Set TEL data --- --- ---
Connection Connects the line for the A6TEL/Q6TEL.
---
Disconnect Disconnects the line.
---
TEL data
Sets the notice destination data of the A6TEL
or Q6TEL.
---
AT command Registers the modem.
---
Call book Sets phone numbers.
---
Intelligent function utility --- --- ---
Utility list
Shows the utility names required to edit the
intelligent function unit parameters.
---
Customize keys
Changes the key assignment for ladder symbol
input.
---
Options Sets the options.
Appendix 1
Create start-up settings file
Creates a file to save the initial settings of a
project.
---
Window (Common function)
Only for
monitoring
1
QSCPU
2
Reference
3
Cascade Overlaps windows.
---
Tile vertically Vertically arranges windows.
---
Tile horizontally Horizontally arranges windows.
---
Arrange icons Arranges icons at the bottom of the window.
---
Close all Windows Closes all open windows.
---
1: Indicates the availability when the GX Developer is installed as "Only for monitoring
GX Developer".
: Available, : Unavailable
2: Indicates the menu selectability when using the QSCPU.
: Selectable (Only for the QSCPU),
: Selectable (Some changes for the QSCPU in the function common to all models),
: Selectable (No changes for the QSCPU in the function common to all models),
: Cannot be selected.
3: For functions without references, refer to the GX Developer Version 8 Operating
Manual.