Filter
Top Products
Section 1
General Information
Programming & Operation 4-5MN722
Display Mode Continued
Fault Log Access When a fault condition occurs, motor operation stops and a fault code is displayed on the
Keypad display. The control keeps a log of up to the last 31 faults. If more than 31 faults
have occurred the oldest fault will be deleted from the fault log to make room for the
newest fault. To access the fault log perform the following procedure:
Action Description Display Comments
Apply Power Logo display for 5 seconds.
Display mode showing motor
speed.
Display mode.
Press DISP key 5 times Scroll to the Fault Log screen Fault Log access screen.
Press ENTER key Display first fault type and time
fault occurred.
1=Most recent fault displayed.
2=Second most recent fault, etc.
Press Y key
Scroll through fault messages.
If no messages, the fault log exit
choice is displayed.
Press ENTER key Return to display mode. Display mode stop key LED is on.