Mitsubishi Electronics C64T Crib Toy User Manual


 
5. Base Specifications Parameters
49
# Items Details
Setting range (unit)
1227 aux11
(bit2)
Measures
against tool
setter
chattering
Select a condition where a relieving operation completes
after measurement with tools.
0: Sensor signals have stopped for 500 ms or longer.
1: 100 µs or longer has passed after sensor signals
stopped.
0/1
aux11
(bit3)
Absolute
coordinate
switching
(nose R)
Select whether to display a nose position or coordinate
value with the absolute coordinate counter.
0: Displays the nose position.
1: Displays the position specified by program
command.
0/1
aux11
(bit4)
Program
address
check
Specify whether to simply check the program address
when the machining program is executed.
0: Does not check the program address.
1: Checks the program address.
0/1
aux11
(bit5)
Spindle
rotation
speed clamp
Specify whether to clamp the rotation speed in
constant surface speed mode when the spindle
rotation clamp command is issued.
0: Clamps the rotation regardless of the constant
surface speed mode.
1: Clamps the rotation only in constant surface
speed mode.
0/1
aux11
(bit6)
Not used. 0
aux11
(bit7)
Switch the
range of tool
life data to be
input
Set up the range of tool life data to be input or
compared.
0: Inputs or compares all of the data output.
1: Inputs or compares part of the data output
1) Tool life management I data to be input or
compared tool number (D), lifetime (E), life
count (F), and auxiliary data (B).
2) Tool life management II data to be input or
compared Group number (G), method (M),
life (E/F), tool number (D), and compensation
number (H)
0/1