Filter
Top Products
8. Spindle Parameters
8.3 MDS-B-SP/SPH, MDS-C1-SP/SPH
204
No. Items Details
Setting
range
Standard
setting
3233
(PR)
SP033 SFNC1 Spindle
function 1
Set the spindle function 1 in bit units.
0000 to
FFFF
HEX setting
0000
F E D C B A 9 8
poff hzs ront pycal pychg
7 6 5 4 3 2 1 0
pyst pyoff sftk dflt 1a2m
(Note) Always set "0" for the empty bits.
bit Name Meaning when set to 0 Meaning when set to 1
0
1a2m 1 amplifier
2 motor function: Invalid
1 amplifier
2 motor function: Valid
1 dflt Default motor: Main Default motor: Sub
2 sftk SF-TK card invalid SF-TK card valid
3
4
5
6 pyoff
7 pyst
8 pychg
This is used by Mitsubishi.
Set to "0" unless particularly designated.
9
pycal (Conventional
specifications)
High-speed rate
deceleration method
valid for minimum
excitation rate
A
B
This is used by Mitsubishi.
Set to "0" unless particularly designated.
C ront Normal ready ON High-speed ready ON
D
This is used by Mitsubishi.
Set to "0" unless particularly designated.
E
hzs Gate OFF by high-cycle
zero speed invalid
Gate OFF by high-cycle
zero speed valid
F
poff Contactor hold at NC
power OFF invalid
Contactor hold at NC
power OFF valid
(Note) When SPH is used, bit 0 and bit 1 will be invalid.