Filter
Top Products
9. Machine Error Compensation
9.4 Example in Using a Rotation Axis as the Base Axis
277
9.4 Example in Using a Rotation Axis as the Base Axis
Division point number #4123 #4124 #4125 #4126 #4127 #4128 rdvno 4122
Compensation Incremental
−4
2 0 6 2
−6
mdvno 4123
amount Absolute
−4 −2 −2
4 6 0 pdvno 4128
In this case‚ the sum of the compensation amounts set according to the incremental system is
always 0. For the absolute system‚ the compensation amount at the terminal point (360 degrees) is
always 0.
360°
Error