Mitsubishi Electronics C64T Crib Toy User Manual


 
2. Machining Parameters
2.5 Barrier Data
8
# Item Contents Setting range (unit)
8208 G76/87 (–)
(For M system only)
Specify the shift direction at G76 and G87.
0: Shift to (+) direction
1: Shift to (–) direction
0/1
8209 G60 SHIFT
(For M system only)
Set the last positioning direction and distance for a
G60 (uni-directional positioning) command.
–99999.999 to
+99999.999 (mm)
8210 OT INSIDE The stored stoke limit function set in #8204 and
#8205 prevents the machine from moving to the
inside or outside of the specified range.
0: Inhibits outside area.
(select stored stroke limit II.)
1: Inhibits inside area.
(select stored stroke limit II B.)
0/1
2.5 Barrier Data
# Item Contents Setting range (unit)
8300 P0
(For L system only)
Set the reference X-coordinates of the chuck and
the tail stock barrier.
Set the center coordinate (Radius value) of
workpiece by the basic machine coordinate system.
–99999.999 to
+99999.999 (mm)
8301
8302
8303
8304
8305
8306
P1
P2
P3
P4
P5
P6
(For L system only)
Set the area of the chuck and tail stock barrier.
(Radius value)
Set the coordinate value from the center of workpiece
for X-axis.
Set the coordinate value by basic machine
coordinate system for Z-axis.
–99999.999 to
+99999.999 (mm)