Mitsubishi Electronics C64T Crib Toy User Manual


 
15. Indexing Axis Commands
290
15. Indexing Axis Commands
(Note) These parameters are used only with the G64T.
Item Details Setting range (unit)
POSITION Command the indexing position. –99999.999
to 99999.999
(0.001mm/0.001°,
0.0001mm/0.0001°)
SPEED Set the indexing speed. 0 to 999999
(mm/min, °/min)
INPOS Set the in-position width, which indicates the output
range of the in-position signal output when
positioning is completed.
0 to 99999.999
(0.001mm/0.001°,
0.0001mm/0.0001°)
FLAG 0: Normal indexing position command
1: Position command valid for external positioning
2: Indexing command compensation valid
0/1/2
100 sets can be set for each axis.
When changing the axis, set the axis No. after "X" in the first setting area, such as # (X2), and then
press INPUT. Axis No. "1" corresponds to the 1st peripheral axis.
(Example 1) To change to 2nd peripheral axis # ( X2) INPUT
(Example 2) To change to 4th peripheral axis # ( X4) INPUT