Filter
Top Products
Chapter 5 Work in Edit mode 72
Map a screen control to an action
1 In the workspace, click the screen control you want to map.
The Screen Control Inspector appears below the workspace, showing the settings for the
selected screen control. If the screen control is currently mapped, a tab with the name of the
mapping is visible in addition to the General and Mapping tabs. If the control is unmapped, the
tab is labeled “Unmapped.”
2 Click the Unmapped (or name of mapping) tab.
The Parameter Mapping browser appears below the workspace. The Actions folder is available in
the Parameter Mapping browser.
3 In the column on the left of the Parameter Mapping browser, click the Actions folder.
The available actions appear in the second column of the browser.
Click the Actions folder to see
available actions.
Click the action you want to
map from the submenu.
4 Select the action you want to map.
Note: If you map a knob screen control to an action to select a patch (such as the −10 Patches,
Previous Patch, Next Patch, or +10 Patches action), the screen control jumps to the value of the
hardware control, regardless of the setting of the Respond to Hardware Move parameter in the
Screen Control Inspector.