Filter
Top Products
Chapter 4 Get started with MainStage 33
Change a channel strip setting
You can quickly change the instrument, eects, and other parameters for a channel strip by
selecting a new setting from the Channel Strip Library. The browser shows available settings for
the currently selected channel strip.
Select a new channel strip setting
1 Make sure that the channel strip you want to change is selected (highlighted).
2 In the Channel Strip Inspector, click the Channel Strip Library tab.
In the Channel Strip Library, channel strip settings appear as a series of folders with dierent
instrument and usage categories. If you have GarageBand or have one or more Jam Pack
collections installed on your computer, those settings appear below the built-in settings.
3 Click a category from the column on the left, then click subcategories from the columns on the
right until you see the settings you want.
Click the channel strip setting
you want to use from the
columns to the right.
Click a category in this column
to see the available choices.
You can also search for channel strip settings by name and perform other functions using the
Channel Strip Library. For more information about the Channel Strip Inspector, see Choose
channel strip settings on page 49.