Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Song Mode
Song Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F6] CHAIN
Song Record
Song Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
[F6] ALL TR
During Song Recording
[F1] SETUP
[F3] REST
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Song Edit
[F1] CHANGE
[F2] VIEW FLT
[F4] TR SEL
[F5] INSERT
[F6] DELETE
Song Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] MEAS
[F5] TRACK
[F6] SONG
Supplementary Information
85
PitchBend
These are the events that define continuous changes in pitch and they are generated by Pitch Bend Wheel operation.
DATA
Determines the Pitch Bend data.
Settings: -8192 – +8191
ProgramChange
Program change events are used to select Voices.
BANK
Determines the Voice bank. The voice bank consists of MSB and LSB.
Settings: 000 – 127, ***
NOTE Bank select MSB and LSB are actually part of the Control Change set of messages (below). However, since they apply
specifically to Voice selection, they are grouped and described here.
PC NO (Program Change Number)
Determines the specific Voice (from the bank selected by MSB and LSB above).
Settings: 000 – 127
NOTE For information on the Voice Bank and Voice number, see the “Voice List” in the “Data List” PDF document.
Control Change
These events control the sound and certain response characteristics of the voice, and are usually generated/recorded
by moving a controller (such as a modulation wheel, knob, slider or foot controller).
CTRL NO (Control Number)
Determines the Control Change number.
Settings: 000 – 127
NOTE For information on the functions assigned to the each Control Change number, see the “MIDI” section of the
“Synthesizer Parameter Manual” PDF document.
DATA
See “Data Entry MSB/LSB” in the “MIDI” section of the “Synthesizer Parameter Manual” PDF document.
Settings: 000 – 127
Ch.AfterTouch (Channel After Touch)
This event is generated when pressure is applied to a key after the note is played.
NOTE
The keyboard of the MOXF6/MOXF8 does not feature an After Touch function. However, you can insert After Touch events into
the Song data from this display.
DATA
This represents the amount of pressure applied to the key.
Settings: 000 – 127
PolyAfterTouch (Polyphonic After Touch)
This event is generated when pressure is applied to a key after the note is played. Unlike the Channel After Touch event,
however, individual data is provided for each key.
NOTE
The keyboard of the MOXF6/MOXF8 does not feature an After Touch function. However, you can insert After Touch events into
the Song data from this display.
NOTE
Determines the key to which After Touch is applied.
Settings: C -2 – G8
DATA
This represents the amount of pressure applied to the key.
Settings: 000 – 127