Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Pattern Mode
Pattern Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F4] PATCH
[F5] REMIX
[F6] CHAIN
Pattern Record
Pattern Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
During Pattern Recording
[F1] SETUP
[F3] RESET
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Pattern Edit
[F1] CHANGE
[F2] VIEW FLT
[F5] INSERT
[F6] DELETE
Pattern Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] PHRASE
[F5] TRACK
[F6] PATTERN
Supplementary Information
102
From this display, you can assign a Preset Phrase or a User Phrase (recorded in the Pattern Record mode) to each
Track and create a Pattern that contains up to 16 Tracks. You can assign a User Phrase created with the currently
selected Pattern. If you wish to use User Phrases recorded to Tracks of other Patterns, use the Phrase Data Copy
function, selected with the [SF6] COPY button.
Phrase Number
Determines the Phrase number to be assigned to a Track. You can select one of the 256 User Phrases stored to the
selected Pattern. Note that by default the User Phrases have no data.
When set to “---,” the Track becomes empty.
Settings: --- (off), 001 – 256
NOTE The MOXF6/MOXF8 features no Preset Phrase data.
Number of Measures
Indicates the name of the selected Phrase.
Section
Shows the Section being currently edited. To change the Section, press the [PATTERN SECTION] button, and then use
the Number [1] – [16] buttons. Pressing the [PATTERN SECTION] assigns the Sections A – P to numbers [1] – [16] in
sequence. Then, pressing the appropriate Number [1] – [16] buttons lets you change the Section.
Meas (Measure)
Shows Measure and Beat for current playback location.
[SF5] CLEAR
This clears the Phrase assignment to the currently selected Track and leaves the Track empty.
[SF6] COPY
The User Phrases that can be assigned with the Patch function are limited to the ones contained in the currently
selected Pattern. This function lets you copy Phrases in another Pattern to the selected one. Press the [SF6] to call up
the following display. After setting the parameters as needed, press the [ENTER] to copy the Phrase data.
NOTICE
Any previous data in the copy destination will be overwritten. Therefore, you should regularly create backup copies of important
data on a USB flash-memory device or the like.
[F4] PATCH
Source Pattern number, Phrase number
Destination Phrase and Track of the Pattern being currently edited