Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
File Mode
[F1] CONFIG
[F2] SAVE
[F3] LOAD
[F4] RENAME
[F5] DELETE
[F6] FLASH
Supplementary Information
156
This operation lets you load files from a USB flash memory device to this synthesizer. You can also perform on the
keyboard while playing backing parts from an SMF file contained in the USB flash memory. For details, see page 160.
TYPE
Among the various types of data saved in a single file on a USB flash memory, you can load all of them to this
synthesizer at once or only a specific, desired type of data. This parameter determines which specific type of data will
be loaded from a single file.
Settings: The file types which can be loaded are as follows.
[F3] LOAD
File Types Extension* Descriptions
All .X6A Files of the “All” type saved to USB flash memory can be loaded and restored to the instrument.
When “All” is selected as a file type to be loaded, “ with System” appears in the display. If this
box is unchecked and the Load is executed, all data with the exception of the system settings in
the Utility mode is loaded.
AllVoice .X6V Files of the “AllVoice” type saved to USB flash memory can be loaded and restored to the
instrument.
1BankVoice .X6A
.X6V
The Voices in the selected Bank of the file saved as an “All”/”AllVoice” type can be loaded.
Please note that the file icons F of “X6A” and “X6V” are changed to G (as virtual folders) when
this file type is selected. When selecting this file and then pressing the [ENTER] button, the Voice
Bank list of the file and the load destination are indicated. Select the source Voice Bank for
loading in the box located at the right of the display.
Voice .X6A
.X6V
A specified Voice in a file that is saved to USB flash memory as an “All” or “All Voice” type can be
individually selected and loaded to the instrument. Please note that the file icons F of “X6A” and
“X6V” are changed to G (as virtual folders) when this file type is selected. When selecting this
file type and then pressing the [ENTER] button, the Voice Bank list of the file is indicated. When
selecting the Bank and then pressing the [ENTER] button, the Voice list of the selected Bank and
the load destination are indicated. Select the source Voice for loading in the box located at the
right of the display, and select the destination Voice for loading at the left of the display.
1BankPerform .X6A The Performances in the selected Bank of the file saved as an “All” can be saved. Please note
that the file icons F of “X6A” are changed to G (as virtual directories) when this file type is
selected. When selecting this file and then pressing the [ENTER] button, the Performance Bank
list of the file and the load destination are indicated. Select the source Performance Bank for
loading in the box located at the right of the display, and select the destination Performance
Bank for loading at the left of the display.
Performance .X6A A specified Performance in a file that is saved to USB flash memory as an “All” type can be
individually selected and loaded to the instrument. Please note that the file icons F of “X6A” are
changed to G (as virtual directories) when this file type is selected. When selecting this file and
then pressing the [ENTER] button, the Performance Bank list of the file is indicated. When
selecting the Bank and then pressing the [ENTER] button, the Performance list of the selected
Bank and the load destination are indicated. Select the source Performance for loading in the
box located at the right of the display, and select the destination Performance for loading at the
left of the display.
AllArp
(All Arpeggio)
.X6G Files of the “AllArp” type saved to the USB flash memory can be loaded and restored to the
instrument.
AllSong .X6S Files of the “AllSong” type saved to the USB flash memory can be loaded and restored to the
instrument.
Song .X6A
.X6S
.MID
A specified Song in a file that is saved to the USB flash memory as an “All” or “All Song” type can
be individually selected and loaded to the instrument. Please note that the file icons F of “X6A”
or “X6S” are changed to G (as virtual directories) when this file type is selected. When selecting
this file and then pressing the [ENTER] button, the Song list of the file and the load destination
are indicated. Select the source Song for loading in the box located at the right of the display,
and select the destination Song for loading at the left of the display. In addition, selecting this file
type lets you load Standard MIDI files (format 0, 1) to a specific Song.
AllPattern .X6P Files of the “AllPattern” type saved to USB flash memory can be loaded and restored to the
instrument.
Currently selected folder (directly)
File/Folder selection box