Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Song Mode
Song Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F6] CHAIN
Song Record
Song Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
[F6] ALL TR
During Song Recording
[F1] SETUP
[F3] REST
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Song Edit
[F1] CHANGE
[F2] VIEW FLT
[F4] TR SEL
[F5] INSERT
[F6] DELETE
Song Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] MEAS
[F5] TRACK
[F6] SONG
Supplementary Information
80
Meas (Measure)
Determines the measure from which Song recording will be started. You can set this parameter also by using the
window for inputting a number directly called up via the [SF6] NUM button.
In this display you can set the Voice-related parameters for the recording Track. The settings here affect the Part for
which the receive channel (set in the Mixing mode) matches the transmit (output) channel of the recording Track.
Voice
Determines the voice used in the recording Track. When the cursor is located here, you can select a voice by using the
bank, group, number buttons and the Category Search function.
Volume
Determines the volume of the recording Track.
Settings: 0 – 127
Pan
Determines the stereo pan position of the recording Track.
Settings: L63 (far left) – C (center) – R63 (far right)
InsEF (Insertion Effect Part Switch)
Determines whether the Insertion effects are applied to the recording Track or not.
Settings: off, on
(Tempo)
Determines the Song tempo. This parameter is same as the tempo setting in the [F1] SETUP display.
Settings: 005.0 – 300.0
NOTE This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the
desired tempo. This function is referred to as “Tap Tempo.”
Meas (Measure)
Determines the measure from which Song recording will be started.
Indicates the Arpeggio Edit display (page 82) of the Song mode.
Pressing the [F5] CLICK button lets you turn the click sound (metronome) on/off for recording.
NOTE In the CLICK display (page 144), you can make various settings for the metronome click, such as the note resolution, volume,
and lead-in count for recording.
Pressing the [F6] lets you switch between Single Track recording and All Track recording.
[F2] VOICE
[F3] ARP ED (Arpeggio Edit)
[F5] CLICK
[F6] ALL TR (All Track)
Knob
Knob
Knob