Filter
Top Products
MOXF6/MOXF8 Reference Manual
20
Basic Structure
Functional blocks
Tone Generator block
A/D Input block
Sequencer block
Arpeggio block
Controller block
Effect block
Internal memory
Reference
Voice mode
Performance mode
Song mode
Pattern mode
Mixing mode
Master mode
Remote mode
Utility mode
Quick setup
File mode
Using iOS Applications
Appendix
MIDI
Part EQ applied to each Part
Settings:
Set in the EQ display (page 67) of Performance Part Edit.
Selection of the Parts to which the Insertion Effect is
applied
Settings:
Set in the INS SW display (page 64) of Performance
Common Edit.
Reverb and Chorus related parameters
Settings:
Set in the CONNECT display (page 63), CHORUS display
and REVERB display (page 64) of Performance Common
Edit, and the EF SEND display (page 66) of Performance Part
Edit.
Master Effect related parameters
Settings:
Set in the MFX display (page 60) of Performance Common
Edit.
Master EQ related parameters
Settings:
Set in the MEQ display (page 61) of Performance Common
Edit.
NOTE Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in
the Performance mode, the effect is set in the A/D IN display of
Performance Common Edit. First, set the Insertion Effects. Then,
making sure that “Mode” (page 146) is set to “1StereoRec” in the
USB I/O display of the Utility mode, set the level of the signal sent to
Chorus and Reverb. When “Mode” is set to “VST” or “2StereoRec,”
the signal which is output from the Insertion Effect will be directly
output to the USB [TO HOST] terminal or OUTPUT [L/MONO]/[R]
jacks.
Part EQ applied to each Part
Settings:
Set in the EQ display (page 118) of Mixing Part Edit.
Selection of the Parts to which the Insertion Effect is
applied
Settings:
Set in the EFFECT display (page 116) of Mixing Common
Edit.
Reverb and Chorus related parameters
Settings:
Set in the EFFECT display (page 116) of Mixing Common
Edit.
Master Effect related parameters
Settings:
Set in the MFX display (page 116) of Mixing Common Edit.
Master EQ related parameters
Settings:
Set in the MEQ display (page 116) of Mixing Common Edit.
NOTE Regarding the audio input signal from the A/D INPUT [L]/[R] jacks in
the Song/Pattern mode, the effect is set in the A/D IN display of the
Mixing Common Edit. First, set the Insertion Effects. Then, making
sure that “Mode” (page 146) is set to “1StereoRec” in the USB I/O
display of the Utility mode, set the level of the signal sent to Chorus
and Reverb. When “Mode” is set to “VST” or “2StereoRec,” the
signal which is output from the Insertion Effect will be directly output
to the USB [TO HOST] terminal or OUTPUT [L/MONO]/[R] jacks.
In the Performance mode
In the Mixing mode
Voice
Part EQ
Insertion A/B
Part 1 – 4
A/D Part
Master
Effect
Master EQ
Reverb
Chorus
Send Level
Chorus
To Rev er b
Return Level
Performance
Part
Part EQ
Voice
Insertion A/B
Part 1 – 16
A/D Part
Master
Effect
Master EQ
Reverb
Chorus
Send Level
Chorus
To Re ve rb
Return Level
Mixing