Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Utility Mode
[F1] GENERAL
[F2] VOICE
[F2] SEQ
[F3] VCE A/D
[F4] CTL ASN
[F5] USB I/O
[F6] MIDI
Utility Job
141
VelCurve (Velocity Curve)
These five curves determine how the actual velocity will be generated and transmitted according to the velocity
(strength) with which you play notes on the keyboard. The graph shown in the display indicates the velocity response
curve. (The horizontal line represents the received velocity values (strength of your playing), while the vertical line
represents the actual velocity values transmitted to the internal/external tone generators.)
Settings: norm, soft, hard, wide, fixed
norm (normal)....This linear “curve” produces one-to-one correspondence between the strength of your keyboard playing
(velocity) and the actual sound change.
soft..................... This curve provides increased response, especially for lower velocities.
hard................... This curve provides increased response, especially for higher velocities.
wide...................This curve accentuates your playing strength by producing lower velocities in response to softer playing and
louder velocities in response to harder playing. As such, you can use this setting to expand your dynamic
range.
fixed...................This setting produces the same amount of sound change (set in Fixed Velocity below), no matter what your
playing strength. The velocity of the notes you play are fixed at the value set here.
FixedVelocity
The Fixed curve can be used to send a fixed velocity to the tone generator regardless of how hard or soft you play the
keyboard. This parameter is only available if you select the “fixed” Velocity Curve above.
Settings: 1 – 127
[SF4] PERF CRE (Performance Creator)
This display determines the parameters related to the Performance Creator which uses the [LAYER]/[SPLIT]/[DRUM
ASSIGN] buttons.
Layer Bank (Layer Voice Bank), Layer Number (Layer Voice Number)
Determines the Voice assigned first when using the Layer function of the Performance Creator. Select the desired Voice
by setting the Bank and Number. The Name is determined automatically.
Split Bank (Split Voice Bank), Split Number (Split Voice Number)
Determines the Voice assigned first when using the Split function of the Performance Creator. Select the desired Voice
by setting the Bank and Number. The Name is determined automatically.
Split Lower/Upper
Determines the keyboard area to which the Voice is assigned when executing the Split function of the Performance
Creator. When “both” is selected, the first Voice is assigned to all the notes on the keyboard. When “lower” is selected,
the first Voice is assigned to the area lower than the Split Point. When “upper” is selected, the first Voice is assigned to
the Split Point and higher.
Settings: both, lower, upper
DrumAssign Bank (Drum Assign Voice Bank), Number (Drum Assign Voice Number)
Determines the Voice assigned first when using the Drum Assign function of the Performance Creator. Select the
desired Voice by setting the Bank and Number. The Name is determined automatically.
ConfirmPopup
If executing the Performance Creator with the Edit Indicator (E) shown in the Voice mode, the edited data will be lost.
This parameter determines whether or not the confirmation prompt appears before executing the Performance Creator.
Settings: off, on
[SF5] REMOTE
This section enables you to set the locate points. When pressing the [UTILITY] button in the Remote mode, only this
REMOTE display is shown.
DAW Select
Determines the DAW software to be controlled by the MOXF6/MOXF8. Simply selecting a DAW type calls up the
appropriate Remote settings automatically.
Settings: Cubase, LogicPro, DigiPerf, SONAR