Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Master Mode
Master Play
[F1] PLAY
[F2] MEMORY
[F3] ZONE SW
Master Edit
Common Edit
[F1] NAME
Zone Edit
[F1] TRANS
[F2] NOTE
[F3] TX SW
[F4] PRESET
[F5] KNOB
Master Job
[F1] INIT
[F4] BULK
129
[SF1] ARP1 (Arpeggio 1) – [SF6] ARP6 (Arpeggio 6)/
[SF1] SCN1 (Scene 1) – [SF6] SCN6 (Scene 6)
When the memorized mode is Voice, Performance, or Pattern, a different Arpeggio type is assigned to each of the [SF1]
ARP1 – [SF6] ARP6 buttons according to the Voice/Performance/Pattern number. The Arpeggio types are assigned to
the buttons with 8th note icons on the display tab. You can call them up by pressing these buttons any time during your
keyboard performance. When the memorized mode is Song, a different Scene setting is assigned to each of the [SF1] –
[SF6] buttons according to the Song number. You can call up the mute settings or solo settings for the Tracks by
pressing these buttons any time during your keyboard performance.
NOTE
The Arpeggios can be registered in the Arpeggio Edit display. For detailed instructions on registering Scenes, see “Registering
the Song Scene” on page 98.
Mode
Determines the mode that is called up when the Master number is selected.
Settings: Voice, Performance, Song, Pattern
Memory
Determines the Program number that is called up when the Master is selected.
Settings: When the Mode is set to Voice: Select a Voice bank and number.
When the Mode is set to Performance: Select a Performance bank and number.
When the Mode is set to Song: Select a Song number.
When the Mode is set to Pattern: Select a Pattern number.
ZoneSwitch
Determines whether the Zone function is used (on) or not (off). See page 130 for details about the Zone function.
Settings: off, on
NOTE When the Mode is set to “Voice” or “Performance” and the Zone Switch is turned on, only Zone 1 can be used in the default
setting (playing Zones 2 – 4 will produce no sound). You can use these Zones by setting various parameters in the Master Edit
mode.
ZoneKnob
When ZoneSwitch is set to “on,” this determines whether the Zone Edit settings are assigned to Knobs 1 – 8 (on), or the
settings in the memorized mode are assigned to the Knobs 1 – 8 (off).
Settings: off, on
NOTE When ZoneSwitch is set to “on,” pressing Knob Function 1 and 2 buttons simultaneously can also set ZoneKnob to on/off. When
this parameter is set to on, the LED indicators of the Knob Function 1 and 2 buttons are turned off.
[F2] MEMORY
[F3] ZONE SW (Zone Switch)
HINT
You can conveniently use the Number buttons to easily turn the Internal/External Switch (page 130) for each Zone
on and off. When the Internal/External Switch for a Zone is on, the corresponding button ([1] – [4] or [9] – [12])
lights.
First, make sure the following settings are active:
Then, press the relevant [PERFORMANCE CONTROL] button:
Master Play
Mode Song
ZoneSwitch on
[1] – [4] buttons Changes IntSw on/off settings for Zone1 – 4.
[9] – [12] buttons Changes ExtSw on/off settings for Zone1 – 4.