Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Performance Mode
Performance Play
[F1] PLAY
[F2] VOICE
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Performance Edit
Common Edit
[F1] GENERAL
[F2] OUT/MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Performance Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Performance Record
[F1] SETUP
[F2] REC TR
[F3] OTHER
[F5] CLICK
[F6] INFO
Supplementary Information
60
[SF5] OTHER
A.Func1 (Assignable Function 1 Mode)
A.Func2 (Assignable Function 2 Mode)
Determines whether the ASSIGNABLE FUNCTION [1] and [2] buttons function as latch (hold) type or momentary type.
For details on settings, see the “Synthesizer Parameter Manual” PDF document.
Settings: momentary, latch
[SF1] OUT (Output)
Volume
Determines the output level of the selected Performance. You can adjust the overall volume, maintaining the balance
between all Parts.
Settings: 0 – 127
Pan
Determines the stereo pan position of the selected Performance. This parameter offsets the same parameter in the Part
Edit setting.
Settings: L63 (far left) – C (center) – R63 (far right)
NOTE A setting of “C” (center) maintains the individual Pan settings of each Part.
ChoSend (Chorus Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the Chorus effect.
Settings: 0 – 127
RevSend (Reverb Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the Reverb effect.
Settings: 0 – 127
NOTE For details about the effect connection in the Performance mode, see page 20.
[SF2] MFX (Master Effect)
Switch
Determines whether Master Effect is applied or not to the selected Performance.
Settings: off, on
Type
Determines the Master Effect type.
Settings: See the “Data List” PDF document.
NOTE The available parameters (except for the above two) differ depending on the currently selected effect type. For more details, see
the “Data List” PDF document.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and
situations. You can change how the sound is affected by the selected pre-programmed settings.
NOTE
For a list of all Preset Effect Types, see the “Data List” PDF document.
Effect Parameters
The effect parameter differs depending on the currently selected effect type. For details on the editable Effect
parameters in each Effect type, see the “Data List” PDF document. Also, for details on the description for each Effect
parameter, see the “Synthesizer Parameter Manual” PDF document.
[F2] OUT/MFX (Output/Master Effect)
Knob
Knob
Knob
Knob